Index: frontend/node_modules/punycode/punycode.js
===================================================================
--- frontend/node_modules/punycode/punycode.js	(revision 9af201e94b5a79beb92a30858fc54de4bc3b9449)
+++ frontend/node_modules/punycode/punycode.js	(revision 9af201e94b5a79beb92a30858fc54de4bc3b9449)
@@ -0,0 +1,443 @@
+'use strict';
+
+/** Highest positive signed 32-bit float value */
+const maxInt = 2147483647; // aka. 0x7FFFFFFF or 2^31-1
+
+/** Bootstring parameters */
+const base = 36;
+const tMin = 1;
+const tMax = 26;
+const skew = 38;
+const damp = 700;
+const initialBias = 72;
+const initialN = 128; // 0x80
+const delimiter = '-'; // '\x2D'
+
+/** Regular expressions */
+const regexPunycode = /^xn--/;
+const regexNonASCII = /[^\0-\x7F]/; // Note: U+007F DEL is excluded too.
+const regexSeparators = /[\x2E\u3002\uFF0E\uFF61]/g; // RFC 3490 separators
+
+/** Error messages */
+const errors = {
+	'overflow': 'Overflow: input needs wider integers to process',
+	'not-basic': 'Illegal input >= 0x80 (not a basic code point)',
+	'invalid-input': 'Invalid input'
+};
+
+/** Convenience shortcuts */
+const baseMinusTMin = base - tMin;
+const floor = Math.floor;
+const stringFromCharCode = String.fromCharCode;
+
+/*--------------------------------------------------------------------------*/
+
+/**
+ * A generic error utility function.
+ * @private
+ * @param {String} type The error type.
+ * @returns {Error} Throws a `RangeError` with the applicable error message.
+ */
+function error(type) {
+	throw new RangeError(errors[type]);
+}
+
+/**
+ * A generic `Array#map` utility function.
+ * @private
+ * @param {Array} array The array to iterate over.
+ * @param {Function} callback The function that gets called for every array
+ * item.
+ * @returns {Array} A new array of values returned by the callback function.
+ */
+function map(array, callback) {
+	const result = [];
+	let length = array.length;
+	while (length--) {
+		result[length] = callback(array[length]);
+	}
+	return result;
+}
+
+/**
+ * A simple `Array#map`-like wrapper to work with domain name strings or email
+ * addresses.
+ * @private
+ * @param {String} domain The domain name or email address.
+ * @param {Function} callback The function that gets called for every
+ * character.
+ * @returns {String} A new string of characters returned by the callback
+ * function.
+ */
+function mapDomain(domain, callback) {
+	const parts = domain.split('@');
+	let result = '';
+	if (parts.length > 1) {
+		// In email addresses, only the domain name should be punycoded. Leave
+		// the local part (i.e. everything up to `@`) intact.
+		result = parts[0] + '@';
+		domain = parts[1];
+	}
+	// Avoid `split(regex)` for IE8 compatibility. See #17.
+	domain = domain.replace(regexSeparators, '\x2E');
+	const labels = domain.split('.');
+	const encoded = map(labels, callback).join('.');
+	return result + encoded;
+}
+
+/**
+ * Creates an array containing the numeric code points of each Unicode
+ * character in the string. While JavaScript uses UCS-2 internally,
+ * this function will convert a pair of surrogate halves (each of which
+ * UCS-2 exposes as separate characters) into a single code point,
+ * matching UTF-16.
+ * @see `punycode.ucs2.encode`
+ * @see <https://mathiasbynens.be/notes/javascript-encoding>
+ * @memberOf punycode.ucs2
+ * @name decode
+ * @param {String} string The Unicode input string (UCS-2).
+ * @returns {Array} The new array of code points.
+ */
+function ucs2decode(string) {
+	const output = [];
+	let counter = 0;
+	const length = string.length;
+	while (counter < length) {
+		const value = string.charCodeAt(counter++);
+		if (value >= 0xD800 && value <= 0xDBFF && counter < length) {
+			// It's a high surrogate, and there is a next character.
+			const extra = string.charCodeAt(counter++);
+			if ((extra & 0xFC00) == 0xDC00) { // Low surrogate.
+				output.push(((value & 0x3FF) << 10) + (extra & 0x3FF) + 0x10000);
+			} else {
+				// It's an unmatched surrogate; only append this code unit, in case the
+				// next code unit is the high surrogate of a surrogate pair.
+				output.push(value);
+				counter--;
+			}
+		} else {
+			output.push(value);
+		}
+	}
+	return output;
+}
+
+/**
+ * Creates a string based on an array of numeric code points.
+ * @see `punycode.ucs2.decode`
+ * @memberOf punycode.ucs2
+ * @name encode
+ * @param {Array} codePoints The array of numeric code points.
+ * @returns {String} The new Unicode string (UCS-2).
+ */
+const ucs2encode = codePoints => String.fromCodePoint(...codePoints);
+
+/**
+ * Converts a basic code point into a digit/integer.
+ * @see `digitToBasic()`
+ * @private
+ * @param {Number} codePoint The basic numeric code point value.
+ * @returns {Number} The numeric value of a basic code point (for use in
+ * representing integers) in the range `0` to `base - 1`, or `base` if
+ * the code point does not represent a value.
+ */
+const basicToDigit = function(codePoint) {
+	if (codePoint >= 0x30 && codePoint < 0x3A) {
+		return 26 + (codePoint - 0x30);
+	}
+	if (codePoint >= 0x41 && codePoint < 0x5B) {
+		return codePoint - 0x41;
+	}
+	if (codePoint >= 0x61 && codePoint < 0x7B) {
+		return codePoint - 0x61;
+	}
+	return base;
+};
+
+/**
+ * Converts a digit/integer into a basic code point.
+ * @see `basicToDigit()`
+ * @private
+ * @param {Number} digit The numeric value of a basic code point.
+ * @returns {Number} The basic code point whose value (when used for
+ * representing integers) is `digit`, which needs to be in the range
+ * `0` to `base - 1`. If `flag` is non-zero, the uppercase form is
+ * used; else, the lowercase form is used. The behavior is undefined
+ * if `flag` is non-zero and `digit` has no uppercase form.
+ */
+const digitToBasic = function(digit, flag) {
+	//  0..25 map to ASCII a..z or A..Z
+	// 26..35 map to ASCII 0..9
+	return digit + 22 + 75 * (digit < 26) - ((flag != 0) << 5);
+};
+
+/**
+ * Bias adaptation function as per section 3.4 of RFC 3492.
+ * https://tools.ietf.org/html/rfc3492#section-3.4
+ * @private
+ */
+const adapt = function(delta, numPoints, firstTime) {
+	let k = 0;
+	delta = firstTime ? floor(delta / damp) : delta >> 1;
+	delta += floor(delta / numPoints);
+	for (/* no initialization */; delta > baseMinusTMin * tMax >> 1; k += base) {
+		delta = floor(delta / baseMinusTMin);
+	}
+	return floor(k + (baseMinusTMin + 1) * delta / (delta + skew));
+};
+
+/**
+ * Converts a Punycode string of ASCII-only symbols to a string of Unicode
+ * symbols.
+ * @memberOf punycode
+ * @param {String} input The Punycode string of ASCII-only symbols.
+ * @returns {String} The resulting string of Unicode symbols.
+ */
+const decode = function(input) {
+	// Don't use UCS-2.
+	const output = [];
+	const inputLength = input.length;
+	let i = 0;
+	let n = initialN;
+	let bias = initialBias;
+
+	// Handle the basic code points: let `basic` be the number of input code
+	// points before the last delimiter, or `0` if there is none, then copy
+	// the first basic code points to the output.
+
+	let basic = input.lastIndexOf(delimiter);
+	if (basic < 0) {
+		basic = 0;
+	}
+
+	for (let j = 0; j < basic; ++j) {
+		// if it's not a basic code point
+		if (input.charCodeAt(j) >= 0x80) {
+			error('not-basic');
+		}
+		output.push(input.charCodeAt(j));
+	}
+
+	// Main decoding loop: start just after the last delimiter if any basic code
+	// points were copied; start at the beginning otherwise.
+
+	for (let index = basic > 0 ? basic + 1 : 0; index < inputLength; /* no final expression */) {
+
+		// `index` is the index of the next character to be consumed.
+		// Decode a generalized variable-length integer into `delta`,
+		// which gets added to `i`. The overflow checking is easier
+		// if we increase `i` as we go, then subtract off its starting
+		// value at the end to obtain `delta`.
+		const oldi = i;
+		for (let w = 1, k = base; /* no condition */; k += base) {
+
+			if (index >= inputLength) {
+				error('invalid-input');
+			}
+
+			const digit = basicToDigit(input.charCodeAt(index++));
+
+			if (digit >= base) {
+				error('invalid-input');
+			}
+			if (digit > floor((maxInt - i) / w)) {
+				error('overflow');
+			}
+
+			i += digit * w;
+			const t = k <= bias ? tMin : (k >= bias + tMax ? tMax : k - bias);
+
+			if (digit < t) {
+				break;
+			}
+
+			const baseMinusT = base - t;
+			if (w > floor(maxInt / baseMinusT)) {
+				error('overflow');
+			}
+
+			w *= baseMinusT;
+
+		}
+
+		const out = output.length + 1;
+		bias = adapt(i - oldi, out, oldi == 0);
+
+		// `i` was supposed to wrap around from `out` to `0`,
+		// incrementing `n` each time, so we'll fix that now:
+		if (floor(i / out) > maxInt - n) {
+			error('overflow');
+		}
+
+		n += floor(i / out);
+		i %= out;
+
+		// Insert `n` at position `i` of the output.
+		output.splice(i++, 0, n);
+
+	}
+
+	return String.fromCodePoint(...output);
+};
+
+/**
+ * Converts a string of Unicode symbols (e.g. a domain name label) to a
+ * Punycode string of ASCII-only symbols.
+ * @memberOf punycode
+ * @param {String} input The string of Unicode symbols.
+ * @returns {String} The resulting Punycode string of ASCII-only symbols.
+ */
+const encode = function(input) {
+	const output = [];
+
+	// Convert the input in UCS-2 to an array of Unicode code points.
+	input = ucs2decode(input);
+
+	// Cache the length.
+	const inputLength = input.length;
+
+	// Initialize the state.
+	let n = initialN;
+	let delta = 0;
+	let bias = initialBias;
+
+	// Handle the basic code points.
+	for (const currentValue of input) {
+		if (currentValue < 0x80) {
+			output.push(stringFromCharCode(currentValue));
+		}
+	}
+
+	const basicLength = output.length;
+	let handledCPCount = basicLength;
+
+	// `handledCPCount` is the number of code points that have been handled;
+	// `basicLength` is the number of basic code points.
+
+	// Finish the basic string with a delimiter unless it's empty.
+	if (basicLength) {
+		output.push(delimiter);
+	}
+
+	// Main encoding loop:
+	while (handledCPCount < inputLength) {
+
+		// All non-basic code points < n have been handled already. Find the next
+		// larger one:
+		let m = maxInt;
+		for (const currentValue of input) {
+			if (currentValue >= n && currentValue < m) {
+				m = currentValue;
+			}
+		}
+
+		// Increase `delta` enough to advance the decoder's <n,i> state to <m,0>,
+		// but guard against overflow.
+		const handledCPCountPlusOne = handledCPCount + 1;
+		if (m - n > floor((maxInt - delta) / handledCPCountPlusOne)) {
+			error('overflow');
+		}
+
+		delta += (m - n) * handledCPCountPlusOne;
+		n = m;
+
+		for (const currentValue of input) {
+			if (currentValue < n && ++delta > maxInt) {
+				error('overflow');
+			}
+			if (currentValue === n) {
+				// Represent delta as a generalized variable-length integer.
+				let q = delta;
+				for (let k = base; /* no condition */; k += base) {
+					const t = k <= bias ? tMin : (k >= bias + tMax ? tMax : k - bias);
+					if (q < t) {
+						break;
+					}
+					const qMinusT = q - t;
+					const baseMinusT = base - t;
+					output.push(
+						stringFromCharCode(digitToBasic(t + qMinusT % baseMinusT, 0))
+					);
+					q = floor(qMinusT / baseMinusT);
+				}
+
+				output.push(stringFromCharCode(digitToBasic(q, 0)));
+				bias = adapt(delta, handledCPCountPlusOne, handledCPCount === basicLength);
+				delta = 0;
+				++handledCPCount;
+			}
+		}
+
+		++delta;
+		++n;
+
+	}
+	return output.join('');
+};
+
+/**
+ * Converts a Punycode string representing a domain name or an email address
+ * to Unicode. Only the Punycoded parts of the input will be converted, i.e.
+ * it doesn't matter if you call it on a string that has already been
+ * converted to Unicode.
+ * @memberOf punycode
+ * @param {String} input The Punycoded domain name or email address to
+ * convert to Unicode.
+ * @returns {String} The Unicode representation of the given Punycode
+ * string.
+ */
+const toUnicode = function(input) {
+	return mapDomain(input, function(string) {
+		return regexPunycode.test(string)
+			? decode(string.slice(4).toLowerCase())
+			: string;
+	});
+};
+
+/**
+ * Converts a Unicode string representing a domain name or an email address to
+ * Punycode. Only the non-ASCII parts of the domain name will be converted,
+ * i.e. it doesn't matter if you call it with a domain that's already in
+ * ASCII.
+ * @memberOf punycode
+ * @param {String} input The domain name or email address to convert, as a
+ * Unicode string.
+ * @returns {String} The Punycode representation of the given domain name or
+ * email address.
+ */
+const toASCII = function(input) {
+	return mapDomain(input, function(string) {
+		return regexNonASCII.test(string)
+			? 'xn--' + encode(string)
+			: string;
+	});
+};
+
+/*--------------------------------------------------------------------------*/
+
+/** Define the public API */
+const punycode = {
+	/**
+	 * A string representing the current Punycode.js version number.
+	 * @memberOf punycode
+	 * @type String
+	 */
+	'version': '2.3.1',
+	/**
+	 * An object of methods to convert from JavaScript's internal character
+	 * representation (UCS-2) to Unicode code points, and back.
+	 * @see <https://mathiasbynens.be/notes/javascript-encoding>
+	 * @memberOf punycode
+	 * @type Object
+	 */
+	'ucs2': {
+		'decode': ucs2decode,
+		'encode': ucs2encode
+	},
+	'decode': decode,
+	'encode': encode,
+	'toASCII': toASCII,
+	'toUnicode': toUnicode
+};
+
+module.exports = punycode;