Changes between Version 10 and Version 11 of ProjectGazePoint


Ignore:
Timestamp:
05/27/18 13:54:47 (7 years ago)
Author:
Monika Rizova
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • ProjectGazePoint

    v10 v11  
    77**Pic.1 The starting screen of !GazePointer**
    88
    9 From this picture we can see there is an area for your head, where you should position before starting the calibration process. After doing that I started calibrating my gaze by clicking on the Calibrate button, and the calibration process is done by looking at the center of the green dots at first, as you can see from the second picture, and afterwards, you also move your head at the direction of the arrow and the green dots, as you can see from picture 3.
     9From this picture we can see there is an area for your head, where you should position before starting the calibration process. After doing that I started calibrating my gaze by clicking on the Calibrate button, and the calibration process is done by looking at the center of the green dots at first, as you can see from the second picture, and afterwards, you also move your head at the direction of the arrow and the green dots, as you can see from pictures 2 through 4.
    1010
    1111[[Image(gp2.png,30%)]]  [[Image(gp32.png,30%)]]  [[Image(gp33.png)]]
    1212
    13 **Pic.2 Calibration process of !GazePointer**
     13**Pic.2 Calibration process of !GazePointer**  **Pic.3 Pointer through the calibration process** **Pic.4 Calibrating the head and gaze**
     14
     15The calibration process is done by looking at 18 dots at first, and then at 4 more dots in the direction of the arrows, while also moving the head in that direction.
    1416
    1517[[Image(gp4.png)]]
    1618
    17 **Pic.4 Saving the calibration data locally and point of Gaze**
     19**Pic.5 Saving the calibration data locally and point of Gaze**