source: vendor/google/apiclient-services/src/Compute/Resource/NodeGroups.php

<?php
/*
 * Copyright 2014 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not
 * use this file except in compliance with the License. You may obtain a copy of
 * the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 * License for the specific language governing permissions and limitations under
 * the License.
 */

namespace Google\Service\Compute\Resource;

use Google\Service\Compute\NodeGroup;
use Google\Service\Compute\NodeGroupAggregatedList;
use Google\Service\Compute\NodeGroupList;
use Google\Service\Compute\NodeGroupsAddNodesRequest;
use Google\Service\Compute\NodeGroupsDeleteNodesRequest;
use Google\Service\Compute\NodeGroupsListNodes;
use Google\Service\Compute\NodeGroupsPerformMaintenanceRequest;
use Google\Service\Compute\NodeGroupsSetNodeTemplateRequest;
use Google\Service\Compute\NodeGroupsSimulateMaintenanceEventRequest;
use Google\Service\Compute\Operation;
use Google\Service\Compute\Policy;
use Google\Service\Compute\TestPermissionsRequest;
use Google\Service\Compute\TestPermissionsResponse;
use Google\Service\Compute\ZoneSetPolicyRequest;

/**
 * The "nodeGroups" collection of methods.
 * Typical usage is:
 *  <code>
 *   $computeService = new Google\Service\Compute(...);
 *   $nodeGroups = $computeService->nodeGroups;
 *  </code>
 */
class NodeGroups extends \Google\Service\Resource
{
  /**
   * Adds specified number of nodes to the node group. (nodeGroups.addNodes)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource.
   * @param NodeGroupsAddNodesRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function addNodes($project, $zone, $nodeGroup, NodeGroupsAddNodesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('addNodes', [$params], Operation::class);
  }
  /**
   * Retrieves an aggregated list of node groups. Note: use nodeGroups.listNodes
   * for more details about each group. To prevent failure, Google recommends that
   * you set the `returnPartialSuccess` parameter to `true`.
   * (nodeGroups.aggregatedList)
   *
   * @param string $project Project ID for this request.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. These two types of filter expressions cannot be
   * mixed in one request. If you want to use AIP-160, your expression must
   * specify the field name, an operator, and the value that you want to use for
   * filtering. The value must be a string, a number, or a boolean. The operator
   * must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
   * are filtering Compute Engine instances, you can exclude instances named
   * `example-instance` by specifying `name != example-instance`. The `:*`
   * comparison can be used to test whether a key has been defined. For example,
   * to find all objects with `owner` label use: ``` labels.owner:* ``` You can
   * also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ``` If you want to use a regular
   * expression, use the `eq` (equal) or `ne` (not equal) operator against a
   * single un-parenthesized expression with or without quotes or against multiple
   * parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`. You cannot combine constraints on multiple fields using regular
   * expressions.
   * @opt_param bool includeAllScopes Indicates whether every visible scope for
   * each scope type (zone, region, global) should be included in the response.
   * For new resource types added after this field, the flag has no effect as new
   * resource types will always include every visible scope for each scope type in
   * response. For resource types which predate this field, if this flag is
   * omitted or false, only scopes of the scope types where the resource type is
   * expected to be found will be included.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false. For example, when partial success behavior is enabled, aggregatedList
   * for a single zone scope either returns all resources in the zone or no
   * resources, with an error code.
   * @opt_param string serviceProjectNumber The Shared VPC service project id or
   * service project number for which aggregated list request is invoked for
   * subnetworks list-usable api.
   * @return NodeGroupAggregatedList
   * @throws \Google\Service\Exception
   */
  public function aggregatedList($project, $optParams = [])
  {
    $params = ['project' => $project];
    $params = array_merge($params, $optParams);
    return $this->call('aggregatedList', [$params], NodeGroupAggregatedList::class);
  }
  /**
   * Deletes the specified NodeGroup resource. (nodeGroups.delete)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource to delete.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function delete($project, $zone, $nodeGroup, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup];
    $params = array_merge($params, $optParams);
    return $this->call('delete', [$params], Operation::class);
  }
  /**
   * Deletes specified nodes from the node group. (nodeGroups.deleteNodes)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource whose nodes will be
   * deleted.
   * @param NodeGroupsDeleteNodesRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function deleteNodes($project, $zone, $nodeGroup, NodeGroupsDeleteNodesRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('deleteNodes', [$params], Operation::class);
  }
  /**
   * Returns the specified NodeGroup. Get a list of available NodeGroups by making
   * a list() request. Note: the "nodes" field should not be used. Use
   * nodeGroups.listNodes instead. (nodeGroups.get)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the node group to return.
   * @param array $optParams Optional parameters.
   * @return NodeGroup
   * @throws \Google\Service\Exception
   */
  public function get($project, $zone, $nodeGroup, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup];
    $params = array_merge($params, $optParams);
    return $this->call('get', [$params], NodeGroup::class);
  }
  /**
   * Gets the access control policy for a resource. May be empty if no such policy
   * or resource exists. (nodeGroups.getIamPolicy)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $resource Name or id of the resource for this request.
   * @param array $optParams Optional parameters.
   *
   * @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
   * @return Policy
   * @throws \Google\Service\Exception
   */
  public function getIamPolicy($project, $zone, $resource, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'resource' => $resource];
    $params = array_merge($params, $optParams);
    return $this->call('getIamPolicy', [$params], Policy::class);
  }
  /**
   * Creates a NodeGroup resource in the specified project using the data included
   * in the request. (nodeGroups.insert)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param int $initialNodeCount Initial count of nodes in the node group.
   * @param NodeGroup $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function insert($project, $zone, $initialNodeCount, NodeGroup $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'initialNodeCount' => $initialNodeCount, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('insert', [$params], Operation::class);
  }
  /**
   * Retrieves a list of node groups available to the specified project. Note: use
   * nodeGroups.listNodes for more details about each group.
   * (nodeGroups.listNodeGroups)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. These two types of filter expressions cannot be
   * mixed in one request. If you want to use AIP-160, your expression must
   * specify the field name, an operator, and the value that you want to use for
   * filtering. The value must be a string, a number, or a boolean. The operator
   * must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
   * are filtering Compute Engine instances, you can exclude instances named
   * `example-instance` by specifying `name != example-instance`. The `:*`
   * comparison can be used to test whether a key has been defined. For example,
   * to find all objects with `owner` label use: ``` labels.owner:* ``` You can
   * also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ``` If you want to use a regular
   * expression, use the `eq` (equal) or `ne` (not equal) operator against a
   * single un-parenthesized expression with or without quotes or against multiple
   * parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`. You cannot combine constraints on multiple fields using regular
   * expressions.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false. For example, when partial success behavior is enabled, aggregatedList
   * for a single zone scope either returns all resources in the zone or no
   * resources, with an error code.
   * @return NodeGroupList
   * @throws \Google\Service\Exception
   */
  public function listNodeGroups($project, $zone, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone];
    $params = array_merge($params, $optParams);
    return $this->call('list', [$params], NodeGroupList::class);
  }
  /**
   * Lists nodes in the node group. (nodeGroups.listNodes)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource whose nodes you want
   * to list.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. These two types of filter expressions cannot be
   * mixed in one request. If you want to use AIP-160, your expression must
   * specify the field name, an operator, and the value that you want to use for
   * filtering. The value must be a string, a number, or a boolean. The operator
   * must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you
   * are filtering Compute Engine instances, you can exclude instances named
   * `example-instance` by specifying `name != example-instance`. The `:*`
   * comparison can be used to test whether a key has been defined. For example,
   * to find all objects with `owner` label use: ``` labels.owner:* ``` You can
   * also filter nested fields. For example, you could specify
   * `scheduling.automaticRestart = false` to include instances only if they are
   * not scheduled for automatic restarts. You can use filtering on nested fields
   * to filter based on resource labels. To filter on multiple expressions,
   * provide each separate expression within parentheses. For example: ```
   * (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By
   * default, each expression is an `AND` expression. However, you can include
   * `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel
   * Skylake") OR (cpuPlatform = "Intel Broadwell") AND
   * (scheduling.automaticRestart = true) ``` If you want to use a regular
   * expression, use the `eq` (equal) or `ne` (not equal) operator against a
   * single un-parenthesized expression with or without quotes or against multiple
   * parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`. You cannot combine constraints on multiple fields using regular
   * expressions.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false. For example, when partial success behavior is enabled, aggregatedList
   * for a single zone scope either returns all resources in the zone or no
   * resources, with an error code.
   * @return NodeGroupsListNodes
   * @throws \Google\Service\Exception
   */
  public function listNodes($project, $zone, $nodeGroup, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup];
    $params = array_merge($params, $optParams);
    return $this->call('listNodes', [$params], NodeGroupsListNodes::class);
  }
  /**
   * Updates the specified node group. (nodeGroups.patch)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource to update.
   * @param NodeGroup $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function patch($project, $zone, $nodeGroup, NodeGroup $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('patch', [$params], Operation::class);
  }
  /**
   * Perform maintenance on a subset of nodes in the node group.
   * (nodeGroups.performMaintenance)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the node group scoping this request.
   * @param NodeGroupsPerformMaintenanceRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function performMaintenance($project, $zone, $nodeGroup, NodeGroupsPerformMaintenanceRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('performMaintenance', [$params], Operation::class);
  }
  /**
   * Sets the access control policy on the specified resource. Replaces any
   * existing policy. (nodeGroups.setIamPolicy)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $resource Name or id of the resource for this request.
   * @param ZoneSetPolicyRequest $postBody
   * @param array $optParams Optional parameters.
   * @return Policy
   * @throws \Google\Service\Exception
   */
  public function setIamPolicy($project, $zone, $resource, ZoneSetPolicyRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('setIamPolicy', [$params], Policy::class);
  }
  /**
   * Updates the node template of the node group. (nodeGroups.setNodeTemplate)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource to update.
   * @param NodeGroupsSetNodeTemplateRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function setNodeTemplate($project, $zone, $nodeGroup, NodeGroupsSetNodeTemplateRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('setNodeTemplate', [$params], Operation::class);
  }
  /**
   * Simulates maintenance event on specified nodes from the node group.
   * (nodeGroups.simulateMaintenanceEvent)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $nodeGroup Name of the NodeGroup resource whose nodes will go
   * under maintenance simulation.
   * @param NodeGroupsSimulateMaintenanceEventRequest $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   * @throws \Google\Service\Exception
   */
  public function simulateMaintenanceEvent($project, $zone, $nodeGroup, NodeGroupsSimulateMaintenanceEventRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'nodeGroup' => $nodeGroup, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('simulateMaintenanceEvent', [$params], Operation::class);
  }
  /**
   * Returns permissions that a caller has on the specified resource.
   * (nodeGroups.testIamPermissions)
   *
   * @param string $project Project ID for this request.
   * @param string $zone The name of the zone for this request.
   * @param string $resource Name or id of the resource for this request.
   * @param TestPermissionsRequest $postBody
   * @param array $optParams Optional parameters.
   * @return TestPermissionsResponse
   * @throws \Google\Service\Exception
   */
  public function testIamPermissions($project, $zone, $resource, TestPermissionsRequest $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('testIamPermissions', [$params], TestPermissionsResponse::class);
  }
}

// Adding a class alias for backwards compatibility with the previous class name.
class_alias(NodeGroups::class, 'Google_Service_Compute_Resource_NodeGroups');