source: trip-planner-front/node_modules/@webassemblyjs/leb128/esm/leb.js@ eed0bf8

Last change on this file since eed0bf8 was 6a3a178, checked in by Ema <ema_spirova@…>, 3 years ago

initial commit

  • Property mode set to 100644
File size: 7.5 KB
RevLine 
[6a3a178]1// Copyright 2012 The Obvious Corporation.
2
3/*
4 * leb: LEB128 utilities.
5 */
6
7/*
8 * Modules used
9 */
10"use strict";
11
12import Long from "@xtuc/long";
13import * as bits from "./bits";
14import * as bufs from "./bufs";
15/*
16 * Module variables
17 */
18
19/** The minimum possible 32-bit signed int. */
20
21var MIN_INT32 = -0x80000000;
22/** The maximum possible 32-bit signed int. */
23
24var MAX_INT32 = 0x7fffffff;
25/** The maximum possible 32-bit unsigned int. */
26
27var MAX_UINT32 = 0xffffffff;
28/** The minimum possible 64-bit signed int. */
29// const MIN_INT64 = -0x8000000000000000;
30
31/**
32 * The maximum possible 64-bit signed int that is representable as a
33 * JavaScript number.
34 */
35// const MAX_INT64 = 0x7ffffffffffffc00;
36
37/**
38 * The maximum possible 64-bit unsigned int that is representable as a
39 * JavaScript number.
40 */
41// const MAX_UINT64 = 0xfffffffffffff800;
42
43/*
44 * Helper functions
45 */
46
47/**
48 * Determines the number of bits required to encode the number
49 * represented in the given buffer as a signed value. The buffer is
50 * taken to represent a signed number in little-endian form.
51 *
52 * The number of bits to encode is the (zero-based) bit number of the
53 * highest-order non-sign-matching bit, plus two. For example:
54 *
55 * 11111011 01110101
56 * high low
57 *
58 * The sign bit here is 1 (that is, it's a negative number). The highest
59 * bit number that doesn't match the sign is bit #10 (where the lowest-order
60 * bit is bit #0). So, we have to encode at least 12 bits total.
61 *
62 * As a special degenerate case, the numbers 0 and -1 each require just one bit.
63 */
64
65function signedBitCount(buffer) {
66 return bits.highOrder(bits.getSign(buffer) ^ 1, buffer) + 2;
67}
68/**
69 * Determines the number of bits required to encode the number
70 * represented in the given buffer as an unsigned value. The buffer is
71 * taken to represent an unsigned number in little-endian form.
72 *
73 * The number of bits to encode is the (zero-based) bit number of the
74 * highest-order 1 bit, plus one. For example:
75 *
76 * 00011000 01010011
77 * high low
78 *
79 * The highest-order 1 bit here is bit #12 (where the lowest-order bit
80 * is bit #0). So, we have to encode at least 13 bits total.
81 *
82 * As a special degenerate case, the number 0 requires 1 bit.
83 */
84
85
86function unsignedBitCount(buffer) {
87 var result = bits.highOrder(1, buffer) + 1;
88 return result ? result : 1;
89}
90/**
91 * Common encoder for both signed and unsigned ints. This takes a
92 * bigint-ish buffer, returning an LEB128-encoded buffer.
93 */
94
95
96function encodeBufferCommon(buffer, signed) {
97 var signBit;
98 var bitCount;
99
100 if (signed) {
101 signBit = bits.getSign(buffer);
102 bitCount = signedBitCount(buffer);
103 } else {
104 signBit = 0;
105 bitCount = unsignedBitCount(buffer);
106 }
107
108 var byteCount = Math.ceil(bitCount / 7);
109 var result = bufs.alloc(byteCount);
110
111 for (var i = 0; i < byteCount; i++) {
112 var payload = bits.extract(buffer, i * 7, 7, signBit);
113 result[i] = payload | 0x80;
114 } // Mask off the top bit of the last byte, to indicate the end of the
115 // encoding.
116
117
118 result[byteCount - 1] &= 0x7f;
119 return result;
120}
121/**
122 * Gets the byte-length of the value encoded in the given buffer at
123 * the given index.
124 */
125
126
127function encodedLength(encodedBuffer, index) {
128 var result = 0;
129
130 while (encodedBuffer[index + result] >= 0x80) {
131 result++;
132 }
133
134 result++; // to account for the last byte
135
136 if (index + result > encodedBuffer.length) {// FIXME(sven): seems to cause false positives
137 // throw new Error("integer representation too long");
138 }
139
140 return result;
141}
142/**
143 * Common decoder for both signed and unsigned ints. This takes an
144 * LEB128-encoded buffer, returning a bigint-ish buffer.
145 */
146
147
148function decodeBufferCommon(encodedBuffer, index, signed) {
149 index = index === undefined ? 0 : index;
150 var length = encodedLength(encodedBuffer, index);
151 var bitLength = length * 7;
152 var byteLength = Math.ceil(bitLength / 8);
153 var result = bufs.alloc(byteLength);
154 var outIndex = 0;
155
156 while (length > 0) {
157 bits.inject(result, outIndex, 7, encodedBuffer[index]);
158 outIndex += 7;
159 index++;
160 length--;
161 }
162
163 var signBit;
164 var signByte;
165
166 if (signed) {
167 // Sign-extend the last byte.
168 var lastByte = result[byteLength - 1];
169 var endBit = outIndex % 8;
170
171 if (endBit !== 0) {
172 var shift = 32 - endBit; // 32 because JS bit ops work on 32-bit ints.
173
174 lastByte = result[byteLength - 1] = lastByte << shift >> shift & 0xff;
175 }
176
177 signBit = lastByte >> 7;
178 signByte = signBit * 0xff;
179 } else {
180 signBit = 0;
181 signByte = 0;
182 } // Slice off any superfluous bytes, that is, ones that add no meaningful
183 // bits (because the value would be the same if they were removed).
184
185
186 while (byteLength > 1 && result[byteLength - 1] === signByte && (!signed || result[byteLength - 2] >> 7 === signBit)) {
187 byteLength--;
188 }
189
190 result = bufs.resize(result, byteLength);
191 return {
192 value: result,
193 nextIndex: index
194 };
195}
196/*
197 * Exported bindings
198 */
199
200
201function encodeIntBuffer(buffer) {
202 return encodeBufferCommon(buffer, true);
203}
204
205function decodeIntBuffer(encodedBuffer, index) {
206 return decodeBufferCommon(encodedBuffer, index, true);
207}
208
209function encodeInt32(num) {
210 var buf = bufs.alloc(4);
211 buf.writeInt32LE(num, 0);
212 var result = encodeIntBuffer(buf);
213 bufs.free(buf);
214 return result;
215}
216
217function decodeInt32(encodedBuffer, index) {
218 var result = decodeIntBuffer(encodedBuffer, index);
219 var parsed = bufs.readInt(result.value);
220 var value = parsed.value;
221 bufs.free(result.value);
222
223 if (value < MIN_INT32 || value > MAX_INT32) {
224 throw new Error("integer too large");
225 }
226
227 return {
228 value: value,
229 nextIndex: result.nextIndex
230 };
231}
232
233function encodeInt64(num) {
234 var buf = bufs.alloc(8);
235 bufs.writeInt64(num, buf);
236 var result = encodeIntBuffer(buf);
237 bufs.free(buf);
238 return result;
239}
240
241function decodeInt64(encodedBuffer, index) {
242 var result = decodeIntBuffer(encodedBuffer, index);
243 var value = Long.fromBytesLE(result.value, false);
244 bufs.free(result.value);
245 return {
246 value: value,
247 nextIndex: result.nextIndex,
248 lossy: false
249 };
250}
251
252function encodeUIntBuffer(buffer) {
253 return encodeBufferCommon(buffer, false);
254}
255
256function decodeUIntBuffer(encodedBuffer, index) {
257 return decodeBufferCommon(encodedBuffer, index, false);
258}
259
260function encodeUInt32(num) {
261 var buf = bufs.alloc(4);
262 buf.writeUInt32LE(num, 0);
263 var result = encodeUIntBuffer(buf);
264 bufs.free(buf);
265 return result;
266}
267
268function decodeUInt32(encodedBuffer, index) {
269 var result = decodeUIntBuffer(encodedBuffer, index);
270 var parsed = bufs.readUInt(result.value);
271 var value = parsed.value;
272 bufs.free(result.value);
273
274 if (value > MAX_UINT32) {
275 throw new Error("integer too large");
276 }
277
278 return {
279 value: value,
280 nextIndex: result.nextIndex
281 };
282}
283
284function encodeUInt64(num) {
285 var buf = bufs.alloc(8);
286 bufs.writeUInt64(num, buf);
287 var result = encodeUIntBuffer(buf);
288 bufs.free(buf);
289 return result;
290}
291
292function decodeUInt64(encodedBuffer, index) {
293 var result = decodeUIntBuffer(encodedBuffer, index);
294 var value = Long.fromBytesLE(result.value, true);
295 bufs.free(result.value);
296 return {
297 value: value,
298 nextIndex: result.nextIndex,
299 lossy: false
300 };
301}
302
303export default {
304 decodeInt32: decodeInt32,
305 decodeInt64: decodeInt64,
306 decodeIntBuffer: decodeIntBuffer,
307 decodeUInt32: decodeUInt32,
308 decodeUInt64: decodeUInt64,
309 decodeUIntBuffer: decodeUIntBuffer,
310 encodeInt32: encodeInt32,
311 encodeInt64: encodeInt64,
312 encodeIntBuffer: encodeIntBuffer,
313 encodeUInt32: encodeUInt32,
314 encodeUInt64: encodeUInt64,
315 encodeUIntBuffer: encodeUIntBuffer
316};
Note: See TracBrowser for help on using the repository browser.