source: trip-planner-front/node_modules/hdr-histogram-js/dist/ZigZagEncoding.js@ 571e0df

Last change on this file since 571e0df was 6a3a178, checked in by Ema <ema_spirova@…>, 3 years ago

initial commit

  • Property mode set to 100644
File size: 5.6 KB
Line 
1"use strict";
2Object.defineProperty(exports, "__esModule", { value: true });
3const { pow, floor } = Math;
4const TWO_POW_7 = pow(2, 7);
5const TWO_POW_14 = pow(2, 14);
6const TWO_POW_21 = pow(2, 21);
7const TWO_POW_28 = pow(2, 28);
8const TWO_POW_35 = pow(2, 35);
9const TWO_POW_42 = pow(2, 42);
10const TWO_POW_49 = pow(2, 49);
11const TWO_POW_56 = pow(2, 56);
12/**
13 * This class provides encoding and decoding methods for writing and reading
14 * ZigZag-encoded LEB128-64b9B-variant (Little Endian Base 128) values to/from a
15 * {@link ByteBuffer}. LEB128's variable length encoding provides for using a
16 * smaller nuber of bytes for smaller values, and the use of ZigZag encoding
17 * allows small (closer to zero) negative values to use fewer bytes. Details
18 * on both LEB128 and ZigZag can be readily found elsewhere.
19 *
20 * The LEB128-64b9B-variant encoding used here diverges from the "original"
21 * LEB128 as it extends to 64 bit values: In the original LEB128, a 64 bit
22 * value can take up to 10 bytes in the stream, where this variant's encoding
23 * of a 64 bit values will max out at 9 bytes.
24 *
25 * As such, this encoder/decoder should NOT be used for encoding or decoding
26 * "standard" LEB128 formats (e.g. Google Protocol Buffers).
27 */
28class ZigZagEncoding {
29 /**
30 * Writes a long value to the given buffer in LEB128 ZigZag encoded format
31 * (negative numbers not supported)
32 * @param buffer the buffer to write to
33 * @param value the value to write to the buffer
34 */
35 static encode(buffer, value) {
36 if (value >= 0) {
37 value = value * 2;
38 }
39 else {
40 value = -value * 2 - 1;
41 }
42 if (value < TWO_POW_7) {
43 buffer.put(value);
44 }
45 else {
46 buffer.put(value | 0x80);
47 if (value < TWO_POW_14) {
48 buffer.put(floor(value / TWO_POW_7));
49 }
50 else {
51 buffer.put(floor(value / TWO_POW_7) | 0x80);
52 if (value < TWO_POW_21) {
53 buffer.put(floor(value / TWO_POW_14));
54 }
55 else {
56 buffer.put(floor(value / TWO_POW_14) | 0x80);
57 if (value < TWO_POW_28) {
58 buffer.put(floor(value / TWO_POW_21));
59 }
60 else {
61 buffer.put(floor(value / TWO_POW_21) | 0x80);
62 if (value < TWO_POW_35) {
63 buffer.put(floor(value / TWO_POW_28));
64 }
65 else {
66 buffer.put(floor(value / TWO_POW_28) | 0x80);
67 if (value < TWO_POW_42) {
68 buffer.put(floor(value / TWO_POW_35));
69 }
70 else {
71 buffer.put(floor(value / TWO_POW_35) | 0x80);
72 if (value < TWO_POW_49) {
73 buffer.put(floor(value / TWO_POW_42));
74 }
75 else {
76 buffer.put(floor(value / TWO_POW_42) | 0x80);
77 if (value < TWO_POW_56) {
78 buffer.put(floor(value / TWO_POW_49));
79 }
80 else {
81 // should not happen
82 buffer.put(floor(value / TWO_POW_49) + 0x80);
83 buffer.put(floor(value / TWO_POW_56));
84 }
85 }
86 }
87 }
88 }
89 }
90 }
91 }
92 }
93 /**
94 * Read an LEB128-64b9B ZigZag encoded long value from the given buffer
95 * (negative numbers not supported)
96 * @param buffer the buffer to read from
97 * @return the value read from the buffer
98 */
99 static decode(buffer) {
100 let v = buffer.get();
101 let value = v & 0x7f;
102 if ((v & 0x80) != 0) {
103 v = buffer.get();
104 value += (v & 0x7f) * TWO_POW_7;
105 if ((v & 0x80) != 0) {
106 v = buffer.get();
107 value += (v & 0x7f) * TWO_POW_14;
108 if ((v & 0x80) != 0) {
109 v = buffer.get();
110 value += (v & 0x7f) * TWO_POW_21;
111 if ((v & 0x80) != 0) {
112 v = buffer.get();
113 value += (v & 0x7f) * TWO_POW_28;
114 if ((v & 0x80) != 0) {
115 v = buffer.get();
116 value += (v & 0x7f) * TWO_POW_35;
117 if ((v & 0x80) != 0) {
118 v = buffer.get();
119 value += (v & 0x7f) * TWO_POW_42;
120 if ((v & 0x80) != 0) {
121 v = buffer.get();
122 value += (v & 0x7f) * TWO_POW_49;
123 if ((v & 0x80) != 0) {
124 v = buffer.get();
125 value += (v & 0x7f) * TWO_POW_56;
126 }
127 }
128 }
129 }
130 }
131 }
132 }
133 }
134 if (value % 2 === 0) {
135 value = value / 2;
136 }
137 else {
138 value = -(value + 1) / 2;
139 }
140 return value;
141 }
142}
143exports.default = ZigZagEncoding;
144//# sourceMappingURL=ZigZagEncoding.js.map
Note: See TracBrowser for help on using the repository browser.